Request Parameters Response Elements Errors Examples See Also

RestoreDBClusterFromS3

Creates an Amazon Aurora DB cluster from MySQL data stored in an Amazon S3 bucket. Amazon RDS must be authorized to access the Amazon S3 bucket and the data must be created using the Percona XtraBackup utility as described in Migrating Data from MySQL by Using an Amazon S3 Bucket in the Amazon Aurora User Guide.

Note

This operation only restores the DB cluster, not the DB instances for that DB cluster. You must invoke the CreateDBInstance operation to create DB instances for the restored DB cluster, specifying the identifier of the restored DB cluster in DBClusterIdentifier. You can create DB instances only after the RestoreDBClusterFromS3 operation has completed and the DB cluster is available.

For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.

Note

This operation only applies to Aurora DB clusters. The source DB engine must be MySQL.

You can use the AssociatedRoles parameter to associate one or more AWS Identity and Access Management (IAM) roles with the Aurora DB cluster when you restore it from Amazon S3.

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

DBClusterIdentifier

The name of the DB cluster to create from the source data in the Amazon S3 bucket. This parameter isn't case-sensitive.

Constraints:

Must contain from 1 to 63 letters, numbers, or hyphens.
First character must be a letter.
Can't end with a hyphen or contain two consecutive hyphens.

Example: my-cluster1

Type: String

Required: Yes

Engine

The name of the database engine to be used for this DB cluster.

Valid Values: aurora-mysql (for Aurora MySQL)

Type: String

Required: Yes

MasterUsername

The name of the master user for the restored DB cluster.

Constraints:

Must be 1 to 16 letters or numbers.
First character must be a letter.
Can't be a reserved word for the chosen database engine.

Type: String

Required: Yes

S3BucketName

The name of the Amazon S3 bucket that contains the data used to create the Amazon Aurora DB cluster.

Type: String

Required: Yes

S3IngestionRoleArn

The Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that authorizes Amazon RDS to access the Amazon S3 bucket on your behalf.

Type: String

Required: Yes

SourceEngine

The identifier for the database engine that was backed up to create the files stored in the Amazon S3 bucket.

Valid Values: mysql

Type: String

Required: Yes

SourceEngineVersion

The version of the database that the backup files were created from.

MySQL versions 5.7 and 8.0 are supported.

Example: 5.7.40, 8.0.28

Type: String

Required: Yes

AssociatedRoles.DBClusterAssociatedRole.N

A list of AWS Identity and Access Management (IAM) roles to associate with the DB cluster when it's restored from Amazon S3. Each role grants the DB cluster permission to access other Amazon Web Services on your behalf. For each role, specify a role ARN and, optionally, the feature name (such as s3Import, s3Export, or Lambda).

Type: Array of DBClusterAssociatedRole objects

Array Members: Minimum number of 0 items. Maximum number of 15 items.

Required: No

AvailabilityZones.AvailabilityZone.N

A list of Availability Zones (AZs) where instances in the restored DB cluster can be created.

Type: Array of strings

Required: No

BacktrackWindow

The target backtrack window, in seconds. To disable backtracking, set this value to 0.

Note

Currently, Backtrack is only supported for Aurora MySQL DB clusters.

Default: 0

Constraints:

If specified, this value must be set to a number from 0 to 259,200 (72 hours).

Type: Long

Required: No

BackupRetentionPeriod

The number of days for which automated backups of the restored DB cluster are retained. You must specify a minimum value of 1.

Default: 1

Constraints:

Must be a value from 1 to 35

Type: Integer

Required: No

CharacterSetName

A value that indicates that the restored DB cluster should be associated with the specified CharacterSet.

Type: String

Required: No

CopyTagsToSnapshot

Specifies whether to copy all tags from the restored DB cluster to snapshots of the restored DB cluster. The default is not to copy them.

Type: Boolean

Required: No

DatabaseName

The database name for the restored DB cluster.

Type: String

Required: No

DBClusterParameterGroupName

The name of the DB cluster parameter group to associate with the restored DB cluster. If this argument is omitted, the default parameter group for the engine version is used.

Constraints:

If supplied, must match the name of an existing DBClusterParameterGroup.

Type: String

Required: No

DBSubnetGroupName

A DB subnet group to associate with the restored DB cluster.

Constraints: If supplied, must match the name of an existing DBSubnetGroup.

Example: mydbsubnetgroup

Type: String

Required: No

DeletionProtection

Specifies whether to enable deletion protection for the DB cluster. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

Type: Boolean

Required: No

Domain

Specify the Active Directory directory ID to restore the DB cluster in. The domain must be created prior to this operation.

For Amazon Aurora DB clusters, Amazon RDS can use Kerberos Authentication to authenticate users that connect to the DB cluster. For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

Type: String

Required: No

DomainIAMRoleName

Specify the name of the IAM role to be used when making API calls to the Directory Service.

Type: String

Required: No

EnableCloudwatchLogsExports.member.N

The list of logs that the restored DB cluster is to export to CloudWatch Logs. The values in the list depend on the DB engine being used.

Aurora MySQL

Possible values are audit, error, general, instance, slowquery, and iam-db-auth-error.

Aurora PostgreSQL

Possible value are instance, postgresql, and iam-db-auth-error.

For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

Type: Array of strings

Required: No

EnableIAMDatabaseAuthentication

Specifies whether to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

For more information, see IAM Database Authentication in the Amazon Aurora User Guide.

Type: Boolean

Required: No

EngineLifecycleSupport

The lifecycle type for this DB cluster.

Note

By default, this value is set to open-source-rds-extended-support, which enrolls your DB cluster into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value to open-source-rds-extended-support-disabled. In this case, RDS automatically upgrades your restored DB cluster to a higher engine version, if the major engine version is past its end of standard support date.

You can use this setting to enroll your DB cluster into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB cluster past the end of standard support for that engine version. For more information, see the following sections:

Amazon Aurora - Amazon RDS Extended Support with Amazon Aurora in the Amazon Aurora User Guide
Amazon RDS - Amazon RDS Extended Support with Amazon RDS in the Amazon RDS User Guide

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Valid Values: open-source-rds-extended-support | open-source-rds-extended-support-disabled

Default: open-source-rds-extended-support

Type: String

Required: No

EngineVersion

The version number of the database engine to use.

To list all of the available engine versions for aurora-mysql (Aurora MySQL), use the following command:

aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

Aurora MySQL

Examples: 5.7.mysql_aurora.2.12.0, 8.0.mysql_aurora.3.04.0

Type: String

Required: No

KmsKeyId

The AWS KMS key identifier for an encrypted DB cluster.

The AWS KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different AWS account, specify the key ARN or alias ARN.

If the StorageEncrypted parameter is enabled, and you do not specify a value for the KmsKeyId parameter, then Amazon RDS will use your default KMS key. There is a default KMS key for your AWS account. Your AWS account has a different default KMS key for each AWS Region.

Type: String

Required: No

ManageMasterUserPassword

Specifies whether to manage the master user password with AWS Secrets Manager.

For more information, see Password management with AWS Secrets Manager in the Amazon RDS User Guide and Password management with AWS Secrets Manager in the Amazon Aurora User Guide.

Constraints:

Can't manage the master user password with AWS Secrets Manager if MasterUserPassword is specified.

Type: Boolean

Required: No

MasterUserPassword

The password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".

Constraints:

Must contain from 8 to 41 characters.
Can't be specified if ManageMasterUserPassword is turned on.

Type: String

Required: No

MasterUserSecretKmsKeyId

The AWS KMS key identifier to encrypt a secret that is automatically generated and managed in AWS Secrets Manager.

This setting is valid only if the master user password is managed by RDS in AWS Secrets Manager for the DB cluster.

The AWS KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different AWS account, specify the key ARN or alias ARN.

If you don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different AWS account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

There is a default KMS key for your AWS account. Your AWS account has a different default KMS key for each AWS Region.

Type: String

Required: No

NetworkType

The network type of the DB cluster.

Valid Values:

IPV4
DUAL

The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

Type: String

Required: No

OptionGroupName

A value that indicates that the restored DB cluster should be associated with the specified option group.

Permanent options can't be removed from an option group. An option group can't be removed from a DB cluster once it is associated with a DB cluster.

Type: String

Required: No

Port

The port number on which the instances in the restored DB cluster accept connections.

Default: 3306

Type: Integer

Required: No

PreferredBackupWindow

The daily time range during which automated backups are created if automated backups are enabled using the BackupRetentionPeriod parameter.

The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

Constraints:

Must be in the format hh24:mi-hh24:mi.
Must be in Universal Coordinated Time (UTC).
Must not conflict with the preferred maintenance window.
Must be at least 30 minutes.