100x speed improvement of math operations by 8087 is not an overestimation. The difference for apps relying on math was crazy back then. I experienced this first-hand on my 80286 machine, where it was 3-second vs 300-second calculation results.
One neat feature of 8087 instruction set is that it can be interspersed with x86 instructions in the code stream, giving you a simultaneous access to two processor chips working in parallel. This combo forms a real asymmetrical multi-processor system with certain opportunities for hardware-assisted code parallelization. If a thoughtful instruction scheduling is used, floating operations executed by 8087 work in parallel with the usual integer x86 code.
Any modern processor has different execution ports specialized in different things and replicated a different number of times, and all of them can execute instructions in parallel.
It schedules to these transparently for you, that's known as superscalar execution. To maximize occupation, out-of-order execution and simultaneous multithreading are used.
Transparent scheduling of superscalar execution was a later advance in microprocessors, termed out of order execution. Apart from micros both did come out around the same time in the mid-1960s.
In the x86 microarchitectures superscalar came in Pentium and OoO got introduced in Pentium Pro.
(Superscalar is just having >1 pipelines, which at its introduction meant needing to manually schedule your code very carefully to take advantage of it absent the OoO execution. For example the frequently posted-about Doom optimizations and talk of the u and v pipes are about this. The scheduling didn't happen transparently in early superscalars, at best the cpu automatically stalled, and some archs (eg MIPS, i860, TI C3x) even visibly punted hardware detection of pipeline hazards and required the code to just not go there, see load delay slots and branch delay slots.
)
80186 is often forgotten to have existed because it didn't see much success in the market / because IBM skipped it and went with 80286 for the AT, but it did exist.
The 80186 didn’t really introduce anything new architecturally. It’s basically an 8086 with a few more chips bundled on-die. 80286 however introduced protected mode, expanded the address size to 24 bit, hardware enforce memory protection, multitasking, etc.
x87 is such a weird architecture. It was designed the same way you'd design a chip for a scientific calculator. Heck, It's almost a perfect fit for an HP RPN calculator.
But for a compiler to target, it's just so painful. It's so different from almost all other ways CPUs work. There's a reason both CPU and compilers prefer to avoid x87 when possible and use regular SIMD (SSE/AVX) instead.
Also, the arbitrary "Oh, and the registers are 80 bits wide" is also just one of those weird "Where did that number come from?".
> But for a compiler to target, it's just so painful. It's so different from almost all other ways CPUs work. There's a reason both CPU and compilers prefer to avoid x87 when possible and use regular SIMD (SSE/AVX) instead.
The x87 ISA is essentially a one-address stack-based ISA (so unlike a pure stack ISA, you can reference another value on the stack without having to introduce something like a dup instruction). Which honestly isn't particularly painful to work with for a compiler; it's not usual, but there are other ISAs that are also stack-based (the JVM bytecode is the one that most immediately comes to mind).
The actual weirdness of x87, what makes all the compilers run away from it, is that the only values you can have on the stack are 80-bit extended-precision types. But people don't use those types in their code, they use 32-bit and 64-bit single and double precision, and compilers largely implemented these types by pretending that the x87 just used those value sizes in the first type (the only ones to actually get it correct that I'm aware of are Java's strictfp and Intel's icc, although the latter is merely just correctly implementing FLT_EVAL_METHOD==2). The end result is that compilers caused code to have essentially random and largely uncontrollable precision changes, which pissed a lot of users off, and the SSE units having regular scalar proper single and double precision types made it easier for compilers to switch to that rather than introducing the proper sequences to compile for x87.
There is a significant difference between a stack-based ISA and a stack-based bytecode. In bytecode, it's fine or even a requirement to empty the stack between loop iterations. The JIT will then enregister variables across the loop as appropriate.
With x87, however, that causes extra overhead from loads and stores that's best avoided. Unused stack space can be used to cache frequently used variables, but as operations must use ST(0) as one parameter, FXCH instructions must be used to swap around variables. Matching the x87 stack state on entry and exit of the loop is tricky and compilers historically have had trouble doing it. Different FPUs also differed on the efficiency of FXCH so there were often situations where a particular arrangement would double the speed of a routine on one CPU model and halve it on another.
Not to mention the size difference as well. The JVM stack is 2^16 in size while x87 has 8.
The java compiler can practically pretend like the stack is infinite in size while a compiler dealing with x87 has to contend with spillage in all but the most trivial of algorithms.
It only has 2048 opcodes available. A one-operand register or memory operand operation takes 32, while two register operands would take twice as many. Loads and stores have to specify the memory format (three floating point formats, BCD, word, 64-bit integer), so each instruction used 120 encodings or so even with a single operand; loads and stores alone would use almost all the opcode space if they also had to include the destination register.
In other words there simply isn't room in the encoding to specify two operands, so they went for the stack model.
> Also, the arbitrary "Oh, and the registers are 80 bits wide" is also just one of those weird "Where did that number come from?".
One of the features that was advertised (mentioned in the iAPX 86, 88, 186 Microprocessors Part II book (July 1984)) was the ability to do exact arithmetic on integers up to 2^64, which is possible due to the 64-bit mantissa used in the 80-bit format.
I forgot about the IBM 7030 Stretch (1961), which was also 64 bits. The NORC (Naval Ordnance Research Calculator) (1954) had 16 decimal digits, which is sort of 64 bits.
80-bit wide registers isn't really arbitrary if you consider that the bulk of the floating point number is a 64-bit significand (and the signifiand ALU makes sense as power-of two) and that you don't need as many bits for exponent (it would be wasteful to go to the next power of two up). Memory is stored as 8-bit bytes as the lowest addressable unit, and so the question would be how many extra bytes the number should take, and 80 bits is a nice integer number of 10 bytes.
There's also the fact that for all intents and purposes, the real floating-point unit of any x86 in the last 20 years is the SIMD unit, and legacy x87 instructions are emulated on top of that.
The issue is that x87 is 80bit floats which is awkward. As such, it still requires dedicated hardware.
Intel has proposed and abandoned pushing a new x86 architecture [1] which tweaks x86 instructions to fit better with the reality that everything is 64bit now. Part of that proposal was to make x87 work with 64bit floats instead of 80bit floats (which would have allowed it to share the same floating point units as the SIMD instructions).
One exception that does come to mind, is .Net Framework on x86. AFAIR that didn't use SSE or SSE2. (In x64 mode it did however, since those were part of the baseline for x64)
Strange, because .NET was specifically designed to be a JITted environment and taking advantage of SSE2 when available would ordinarily be an advantage of a JIT. But sure enough, .NET 4.0 x86 still uses x87 instructions for math. It's not even good x87, this is surprisingly bad:
I've looked at some early calculators and they are a whole different world of weirdness. They used decimal arithmetic (BCD) because it's a lot easier than converting between binary and decimal. The first calculators were serial, with a 1-bit adder and shift registers and bits constantly in motion. The Sinclair Scientific calculator used TI's strange 4-bit architecture along with terrible algorithms.
That's a really vertical microcode. It looks more like a specialized assembly than microcode. I guess it makes sense, since the algorithms are so complex and executing one microinstruction per cycle (is that correct?) already provides almost an order of magnitude performance improvement.
Yes, it's one microinstruction per cycle, except there is a 1-cycle delay for branches, adds, and shifts. And some micro-instructions loop, so they can take a bunch of cycles.
I'm curious to know - you say Intel's 8087 emulation code was a bit of a lump at 16KB, do you know if it emulated the 8087 microcode state machine or did it use a different strategy?
I think the emulation code was a rewrite in 8086 assembly language. An 8087 microcode emulator would be slow and difficult. One of the Opcode Collective people is looking at the emulator now, so there may be more details later. Intel claimed that the emulator completely and exactly duplicated the 8087 functionality, so it would be interesting to see if it is 100% accurate or if they missed any corner cases.
One neat feature of 8087 instruction set is that it can be interspersed with x86 instructions in the code stream, giving you a simultaneous access to two processor chips working in parallel. This combo forms a real asymmetrical multi-processor system with certain opportunities for hardware-assisted code parallelization. If a thoughtful instruction scheduling is used, floating operations executed by 8087 work in parallel with the usual integer x86 code.
reply